Perfecto estado
.¿Para qué sirve?
Hand-made True Bypass Box - Double Looper
Sockets:
1xInput
1xOutput
2xSend
2xReturn
9V DC input (coaxial 5.5/2.1 mm)
Switches:
A - turns on/off loop "A"
B - turns on/off loop "B"
INV - inverts the combination of switches A and B
Gold-plated relays for True Bypass Switching
2 L
ED Status Indicators
Heavy-Duty Footswitches
Heavy-Duty Construction with High Quality Components
Hand Wired, All-Analog Construction
If a DC fails, the unit switches to a Bypass Mode - you will still be able to play the guitar and hear its sound (if you were using only not true bypass effects or ordinary looper not based on the relays or based on latched relays - tere would be no sound at all)
Is used for switching an effect or a set of effects, at the same time eliminating them from the signal path when they are not on. It contains two True Bypass effect loops which allow switching the signal path, which can go through any effects plugged or omit them giving True Bypass. Based on a relay, the switching system does not make a negative interference in the audio signal. Thanks to the addition of "INV" switch it is possible to turn on any configuration of the effects plugged with a single stomp.
The major improvement is the addition of a relay by means of which you use the footswtich only for turning on and off the relay. Thanks to that the signal from your guitar doesn't go trough the switch (most of them are NOT DESIGNED for this purpose, though this is the case in many other Loopers available on the market). The relay used in our Looper has been specially designed for transmitting such signals.
Notice: Due to the high power consumption by the relay (approx. 2x40mA) there is no possibility to use a battery to supply the Looper!!! But it is not a problem since you can install it into your pedal board which has AC/DC adapter.
9V DC input
UN CHISME ESTUPENDO QUE YA NO UTILIZO
.Precio: 65 EUROS ENVÍO INCLUÍDO.
La web es ESTA.
Gracias
.